T11 Alloy & Tool Steel
- Shizhang Steel
- China
- 15-45days
- 500 Tons/Month
T11 steel is a kind of low hardenability cold working die steel and high carbon steel with 0.6% carbon. The steel has the advantages of good machinability, high hardness and toughness, but low hardenability and large quenching deformation. Because the steel contains less alloy elements, low tempering resistance, shallow hardening layer, and therefore low load-bearing capacity. With high hardness and wear resistance, grain growth sensitivity is small. The state of supply is hardness ≤207HBW
Product Name: ALLOY & TOOL STEEL---T11
Similar steel grades:
U.S.A | W1A-101(1/2) |
German | DIN 1.1654 |
Japan | JIS SK105 |
Austria | - |
Sweden | - |
China | T11 |
Chemical composition:
Standard | C | Si | Mn |
GB/T1299-2014 | 1.05-1.14 | ≤0.35 | ≤0.40 |
Principal Feature:
T11 steel is a kind of low hardenability cold working die steel and high carbon steel with 0.6% carbon. The steel has the advantages of good machinability, high hardness and toughness, but low hardenability and large quenching deformation. Because the steel contains less alloy elements, low tempering resistance, shallow hardening layer, and therefore low load-bearing capacity. With high hardness and wear resistance, grain growth sensitivity is small. The state of supply is hardness ≤207HBW
Typical Application:
It is used to make tools that are not subjected to violent impact, high hardness and wear-resistant, such as scrapers, cold stamping dies, etc., for various small and medium-sized production batches of molds and molds that resist impact loads
Heat Treatment:
Quenching, 760～780℃ water cooling,.
Size available:
Bars | Turned | Dia 90-505mm |
Black | Dia 60-550mm | |
Flats | Milled | T: 70-320 W: 90-1000mm |
Black | T: 50-320 W: 90-1000mm |
