D3 Cold Work Steel
- Shizhang Steel
- China
- 15-45
- 500 Tons/Month
D3 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding foreign brand of D3 is JIS SKD1、DIN 1.2080、Cr12 steel
Product Name: COLD WORK TOOL STEEL---AISI D3
Similar steel grades:
U.S.A | D3 |
German | 1.2080 |
Japan | SKD1 |
Sweden | -- |
China | Cr12 |
Chemical Composition(%) :
C | Si | Mn | Cr | Mo | P | S |
1.90-2.20 | 0.10-0.60 | 0.20-0.60 | 11.0-13.0 | - | 0.03max | 0.02max |
Principal Feature:
AISI D3 Cold WorkTool Steel is an oil hardening, high carbon/chromium type tool steel.
It has high hardness and wear resistance.
Typical Application:
AISI steel D3 can achieve high hardness and good cutting performance after proper heat treatment, so it is usually used in the manufacture of cutting tools, cold dies and stamping dies.1.2080 steel has excellent wear resistance and can be used under high stress and heavy load conditions.
Heat Treatment:
Forge: Preheat at 900℃-950℃ and then raise to 1050℃-1100℃
Annealing: At 800℃-840℃ Cool slowly in furnace
Stress Relieving: Heat to 650℃, holding for one hour at heat, followed by air cooling
Hardening: Harden from a temperature of 940℃-980℃ followed by oil quenching or warm bath approx. 400℃.
Size available:
Bars | Turned | Dia 20-500mm |
Black | Dia 20-500mm | |
Flats | Milled | T: 8-300 W: 210-610mm |
Black | T: 8-300 W: 210-610mm |
We can provide professional steel as per your detail requirement!
